Demolition And Disposal - Palazzetti WT R/L Série Manuel D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The installation and electrical connection of the power supply unit must be performed strictly by qualified
technical personnel.
The power supply unit A must be positioned at least 30 cm off the floor in a compartment protected
against the infiltration of liquids, humidity and dust. Moreover, the compartment must be accessible
and inspectionable using a tool for maintenance or repairs, only by qualified technical personnel.
Do not insert objects in the openings of the appliance.
If the product is not equipped with a cable for the connection between the mains socket and the power
supply unit, it must be supplied and connected strictly by qualified technical personnel, but at the
expense of the client.
8

Demolition and disposal

The responsibility for the demolition and disposal of the fireplace falls exclusively on the owner who must
act in compliance with the laws on safety, respect and protection of the environment, in force in the country
where the fireplace is installed.
Decommissioning and disposal can be entrusted to a third party, provided only companies authorised for the
recovery and elimination of the materials in question are used
INDICATION:
Always follow the regulations in force in the Country where the appliance is used in
regards to the disposal of materials and any disposal reports.
ATTENTION:
All disassembly operations for the demolition must take place when the fireplace is off
and the power supply disconnected.
remove the entire electric system;
separate the accumulators in the electronic cards;
scrap the fireplace structure through authorised companies;
ATTENTION:
Abandoning the fireplace in accessible areas constitutes a serious danger for people
and animals.
Any liability for damage to people and animals always falls on the owner.
At the time of demolition, the CE marking, this manual and any other documents relating to this fireplace
should be destroyed.
The crossed-out wheelie bin symbol that appears on the label of the appliance indicates that the product at
the end of its useful life must be disposed of separately from other waste.
Within the meaning of art.13 of Legislative Decree no. 151 of 25 July 2005 implementing the Directive
2002/96/EC of 23 February 2003 on Waste Electrical and Electronic Equipment relating to the measures and
procedures designed to prevent the production of waste electrical and electronic equipment, called WEEE,
promoting the reuse, recycling and other forms of recovery so as to reduce the quantity to be disposed of and
improving the intervention of the parties involved in the life cycle of such products.
.
004778150 - 18/08/2020
41

Publicité

Table des Matières
loading

Table des Matières