Palazzetti WT R/L Série Manuel D'installation page 36

7. Install the bottom wall taking care to insert it in the suitable guides (Fig. 6.2c).
Make sure the post combustion outlet holes are centred with the vent on the bottom wall (A); otherwise,
adjust the height of the air diffuser (B) using a screwdriver.
8. Apply the upper locking bracket (S1) that aligns the bottom wall to the two angular components (Fig. 6.2d).
Post-combustion holes position
A
36
A
004778150 - 18/08/2020
Fig. 6.2c
B
B
S1
S1
Product images are purely indicative
Fig. 6.2d