Medela Swing Mode D'emploi page 9

Supplies Needed:
2
Twist and pull the yellow valve off
the connector.
Washing in sink:
5
• Soak all separated parts in
warm soapy water for
5 minutes.
• Clean with a clean dish-cloth
or soft brush.
• Rinse all separated parts
with clear water.
• Allow all parts to air dry in
a clean area.
• Store dry parts when not in use.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
• Mild Dish Soap
• Clean Dish Towel or
Soft Brush
Washing Options:
• You may wash
your kit parts
by following the
instructions on
the Quick Clean
Breastmilk
Removal Soap
bottle.
• Clean Sink or Bowl
• Quality Drinking
Water
3
Remove the white membrane
from the yellow valve.
Washing in dishwasher:
or
• Wash all separated parts
on top rack of dishwasher.
• Allow all breastpump parts
to air dry in a clean area.
™
• Store dry parts when
not in use.
9