Registering And Deregistering Handsets - switel CD738 Mode D'emploi

All manuals and user guides at all-guides.com
14 System
14.1

Registering and deregistering handsets

Further information on the use of several handsets is provided in
Chapter 15. The default setting of the PIN code is 0000".
14.1.1 Registering CD738 handsets
D
MENU , X SYSTEM , OK
X REGISTER , OK
Z, OK
Note: The handset is then automatically assigned an internal call
number. The handset already registered has the internal call
number 1. The second handset registered is assigned the
internal call number 2. This internal call number appears in the
display to the right of the name of the handset.
14.1.2 Registering other DECT−GAP telephones on the base
station
In order to register a DECT−GAP handset from another manufacturer,
follow the instructions in the operating manual provided by the original
manufacturer and then press the Paging button D on the base station
for 3 seconds. The default setting of the PIN code is 0000".
14.1.3 Registering a handset on a DECT/GAP base station from
another manufacturer
Follow the instructions in the operating manual from the original
manufacturer to set the base station from the external manufacturer to
Registration mode.
MENU , X SYSTEM , OK
X REGISTER , OK
Z, OK
258
− System −
Press the Paging button for 3
seconds
Select menu and confirm
Select function and confirm
Enter the PIN code and confirm
Select menu and confirm
Select function and confirm
Enter the PIN code (external
manufacturer) and confirm