Registering And Deregistering Handsets; Register Handset; Deregister Handset; Select Base Station - switel CD7702 Mode D'emploi

− Registering and Deregistering Handsets −
12

Registering and Deregistering Handsets

12.1

Register handset

1. Press the < button.
2. Use the - or + button to select the Registration" option in the display.
3. Press the < button.
4. Use the - or + button to select the Register Handset" option in the display.
5. Press the < button.
6. Use the - or + button to select the Base 1" option in the display.
NOTE: If the you want to register the handset on a new base station, select a base not marked by a star. If
the base station is marked by a star, the memory location is occupied.
7. Press the < button and enter the PIN.
8. Press the < button. The message Base Search" appears in the display.
9. Press and hold the Paging button
signal. Registration is initiated.
NOTE: In order to register a DECT−GAP handset from another manufacturer, follow the instructions in the
operating manual provided by the original manufacturer and then press the
station.
10. Press the < button. The handset is now registered.
The handset is automatically assigned the lowest free internal number (1−5).
The first handset registered has the internal number 1. The second has the internal number 2. When in standby
mode, the internal number appears in the handset display following the handset name.
12.2

Deregister handset

NOTE: A handset can only be deregistered by another handset still registered. This means it is not possible to
complete the deregistration using the handset which is to be deregistered.
1. Press the < button.
2. Use the - or + button to select the Registration" option in the display.
3. Press the < button.
4. Use the - or + button to select the De−register" option in the display.
5. Press the < button. Enter the PIN.
6. Press the < button. Select the handset to be deregistered.
7. Press the < button twice. The handset is now deregistered.
12.3

Select base station

If your handset is registered on several base stations, it can be set to one specific base station or to the automatic
search for the base station with the best reception. To deactivate the automatic search setting, the handset must
be reset to a specific base station again.
1. Press the < button.
2. Use the - or + button to select the Registration" option in the display.
3. Press the < button.
4. Use the - or + button to select the Select Base" option in the display.
5. Press the < button.
6. Use the - or + button to select the required base station or Automatic".
7. Press the < button. The selection is confirmed.
116
P
on the base station (approx. 5 sec.) until you hear an acoustic
P
button on the base