Using Two Handsets; Making An Internal Call; Connecting External Calls To Another Handset; Dialling Stored Numbers From The Phone Book - switel BDT750 Mode D'emploi

4.5

Using two handsets

The two handsets have the internal numbers 1 and 2. This internal number is shown on the
right-hand side of the display. Incoming calls are signalled on both handsets. If the other
handset is already using the external line, the indicator light on the receiver will illuminate on
both handsets. In this case, it is not possible to make a further external call.
4.5.1

Making an internal call

When you have connected multiple handsets to a base station, you will be able to make
internal calls.
To do this, press the
call is accepted with the call button
4.5.2

Connecting external calls to another handset

If you have accepted an external call on one handset, you can forward the external call to
another handset. To do this, press the
required handset. If there should be no reply from the handset called, you can take the call
back with the button.
After the internal call has been accepted at the other handset, you have the following
options:
A. Consultation / Brokering: You can now speak to the internal subscriber and return to
the external caller by pressing the
internal call as many times as you like in this way.
B. Forward the call: The external call is forwarded to the handset called by pressing the
call button on the first handset.
4.6

Dialling stored numbers from the phone book

After you have stored a few phone numbers, you can call these up very quickly and easily.
1. Press the phone book button
alphabetical order.
2. You can now select all of the stored numbers with the
To choose a phone number directly alphabetically, press the appropriate letter.
3. Now press the call button
automatically dialled.
4.7

Call duration display

The call duration in minutes and seconds is shown in the display during a call. Fifteen
seconds after dialling, the display will switch from showing the number dialled to showing
the duration of the call. The call duration will still be retained in the display for a few seconds
after the call has been ended.
108
- Operation -
button and then the number 1 or 2 of the required handset. The
on the handset called.
button and then the number (1 or 2) of the
button. You can switch between the external and the
. The display will now show the first number stored in
and the telephone number displayed will be
and buttons.