Functions - Elite arion DIGITAL Notice D'utilisation

EN
the handlebar or on the handlebar stem. Fit it where most
convenient.
box of the computer. Respect the polarities indicated
where the batteries are housed.
clamps M) and three different O-rings L). Hook the
clamps, using those of suitable size for the handlebar.
The pack also contains a rubber to be inserted between
the support and the handlebar, to prevent scratching the
Fix the support with the release tab towards the rider.
above (fig. 10).
handlebar.
support tab and slide the computer backward.
18
NOTES
USE
connector into the resistance unit (Fig. 11 and Fig. 12).

FUNCTIONS

to be carried out and adapted to the needs of each
also the average and maximum values. There are also
special functions, such as the heart-rate training zones,
for optimising training.
Three different training modes are available:
- Power Mode (POWER): in this mode it is possible to
to maintain the set power. The required power can be
- Level Mode (LEVEL): in this mode it is possible to
This enables the simulation of a situation comparable
to that experienced on the road, therefore the power
generated will depend on the speed being maintained.
- Program Mode (PROGRAM): in this mode it is
possible to choose from ten different training programs