Elite arion DIGITAL Notice D'utilisation page 28

EN
(for example) the data of the previous training session to
be deleted without deleting the totals of the season.
deleting the recorded data.
1. Zero-setting of partial data, carried out through the
RESET function in the main menu. This function
deletes the partial data for average and maximum
speed, average and maximum power, average and
maximum cadence, average and maximum heart-rate,
distance and race time.
After selecting the RESET function, confirmation of the
selected action will be requested. To proceed with
selection. The screen with the message DONE will
appear. This message means that the data has been
"N" and press the middle button.
NOTE: This procedure does not delete total average
speed, total average power, total average cadence,
through modification of settings from the SETUP
menu. For detailed information, refer to the SETUP
section.
total average speed is also modified.
If using a mountain bike, to reduce noise and increase
24
2) For beginners, position the rollers in an entrance hall,
3) Make sure the ARION DIGITAL rests on a flat, stable
surface.
4) The ARION DIGITAL has 3 training modes. When
first starting out, use the level mode (LEVEL) and select
levels and shift gears. You can then proceed with the
other training modes that utilize automatic resistance
Program mode (PROGRAM).
5) Start pedalling and look ahead, like on the road.
or end up over the side of the rollers.
advantage of the rollers, compared to standard training
of hands when closing the roller, to avoid squashing them
between the two side members. To close the frame, place
hands at the ends of the side members (Fig. 15).
become squashed between the side members (Fig. 16).
special grips located at the hinges (Fig.17).