Using The Timer; Stand Time - Panasonic NN-GD38HS Mode D'emploi

Using the Timer

Delay Start Cooking
By using the timer, you are able to program delay start cooking.
Example
Press
Timer/Clock
Note
1. Three stage cooking can be programmed including delay start cooking.
Example
Delay start: 1 hour
2. If the programmed delay time exceeds one hour, the time will count down in units
of minutes. If less than one hour, the time will count down in units of seconds.
3. Delay start cannot be programmed before an auto program.
4. If the oven door is opened during the delay time, the time in the display window
will continue to count down.

Stand Time

By using the timer, you can program stand time after cooking is completed or use to program the
oven as a minute timer.
Example
Set the desired
cooking program
and cooking time.
Note
1. Three stage cooking can be programmed including stand time.
Example
1000 W Power: 4 mins
Once
2. If the oven door is opened during the stand time or minute timer, the time in the
display window will continue to count down.
3. This feature may also be used as a minute timer. In this case press the timer,
set time and press Start.
4. Stand time cannot be programmed after an auto program.
5. If the programmed stand time exceeds one hour, the time will count down in units
26
EN
of minutes. If less than one hour, the time will count down in units of seconds.
Set the delay time by
turning the dial
(up to 9 hours).
1000 W Power: 10 min
Once
Stand time: 5 mins
Set the desired
cooking program
and cooking time.
300 W Power: 20 min
5 times
Press Set desired amount of
Timer/Clock
time by turning the dial
(up to 9 hours).
1000 W Power: 2 mins
Once
Press Start
Press
Start