Using The Timer - Panasonic NN-GD452W Mode D'emploi

Using the timer

Delay start cooking
By using the Timer, you are able to program Delay Start cooking.
example
Set the delay time by
Press Timer.
turning the Time/ Weight
Dial (up to 9 hours).
Notes
1. Three stage cooking can be programmed including Delay Start cooking.
example
Delay Start: 1 hour
2. If the programmed delay time exceeds one hour, the time will count down in units of
minutes. If less than one hour, the time will count down in units of seconds.
3. Delay Start cannot be programmed before an auto program.
Stand time
By using the Timer, you can program Stand Time after cooking is completed or use to program
the oven as a minute timer.
example
Set the desired cooking
program and cooking time.
Notes
1. Three stage cooking can be programmed including stand time.
example
Max Power (1000 W): 4 min
Once
2. If the oven door is opened during the Stand Time or Minute Timer, the time in the
display window will continue to count down.
3. This feature may also be used as a minute timer. In this case press the Timer, set
time and press Start.
4. Stand time cannot be programmed after an auto program.
Set the desired cooking
program and cooking time.
Max Power (1000 W): 10 min
Once
Set desired amount of time
Press Timer.
by turning the Time/Weight
Dial (up to 9 hours).
Stand Time: 5 min
20
EN
Simmer Power (300 W): 20 min
5 Times
Max Power (1000 W): 2 min
Once
Press Start
Press Start.