IP4927_39Y45CP_00_140417:IP3020_38X03CP_11_100514.qxd 2014-4-17 10:37 Page 24
This feature allows you to program the
oven as a kitchen timer. It can also be
used to program a standing time after
cooking is completed and/or to program a
delay start.
to use as a Kitchen timer:
example: to count down 5 minutes.
1.
2.
3.
to set stand time:
example: to cook at P6 power for 3
minutes, with stand time of
5 minutes.
1.
Press 5 times
2.
3.
4.
5.
timer feature
• Press timer once.
• Set time, using Time
Select Dial to 5 min-
utes.
• Press start.
Time will count
down without oven
operating.
• Enter the desired
power level (see page
15 for directions).
• Set cooking time,
using Time Select Dial
to 3 minutes.
• Press timer once.
• Set stand time, using
Time Select Dial to 5
minutes.
• Press start.
Cooking will start.
After cooking, stand
time will count down
without oven
operating.
caution:
if oven lamp is lit while using the timer
feature, the oven is incorrectly pro-
grammed. stop oven immediately and
re-read instructions.
to set delay start:
example: to delay the start of cooking
for 5 minutes, and cook at P6
power for 3 minutes.
1.
2.
3.
Press 5 times
4.
5.
note:
1. When each stage finishes, a two-beep
signal sounds. At the end of the pro-
gram, the oven will beep five times.
2. If the oven door is opened during Stand
Time, Kitchen Timer or Delay Time, the
time on the display will continue to
count down.
3. Stand time and Delay Start cannot be
programmed before any automatic
Function. This is to prevent the starting
temperature of food from rising before
defrosting or cooking begins. A change
in starting temperature could cause
inaccurate results.
4. The maximum programmable time of
Standing Time, Kitchen Time or Delay
Time is up to 90 minutes.
24
• Press timer once.
• Set delay time, using
Time Select Dial to 5
minutes.
• Enter the desired
power level (see page
15 for directions).
• Set cooking time,
using Time Select Dial
to 3 minutes.
• Press start.
Delay time will
count down. Then
cooking will start.