On-Screen Menus - Rotel RAP-1580MKII Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31

On-Screen Menus

Affichage des menus à l'écran
On-Screen-Menüs
Sistema de Menús en Pantalla
INPUT SETUP
SOURCE : VIDEO 1
NAME : VIDEO 1
VIDEO INPUT : HDMI 1
AUDIO INPUT : HDMI Audio
TRIGGER OUTPUT : 1 _ _
DEFAULT MODE : Source Dependent
AUDIO DELAY : 0m sec
LEVEL ADJUST : 0dB
Dirac : Disable
BACK
INPUT SETUP
SOURCE : MULTI INPUT
NAME : M-INPUT
VIDEO INPUT : HDMI1
TRIGGER OUTPUT : 1 _ _
LEVEL ADJUST : 0dB
Dirac : Disable
BACK
INPUT SETUP
SOURCE : PC-USB
NAME : PC-USB
VIDEO INPUT : HDMI 1
AUDIO INPUT : USB Audio 2.0
TRIGGER OUTPUT : 1 _ _
DEFAULT MODE : Source Dependent
AUDIO DELAY : 0m sec
LEVEL ADJUST : 0dB
FIXED VOLUME : Variable
Dirac : Disable
BACK
AUDIO CONFIGURATION
AMPLIFIER SETUP : 7.1.4 Extern Overhead Amp
FRONT (SPEAKER OUT) : Front L/R
CENTER (SPEAKER OUT) : Center
SURROUND (SPEAKER OUT) : Surround L/R
CENTER BACK (SPEAKER OUT) : Center Back L/R
SUBWOOFER (PREOUT) : Subwoofer
HEIGHT 1 (PREOUT) : Overhead Front L/R
HEIGHT 2 (PREOUT) : Overhead Rear L/R
CONFIRM
CANCEL
Notes: Uses external amplifiers for the Overhead speakers.
Two RB-1552MK2 or one RMB-1506 recommended.
NETWORK CONFIGURATION
IP ADDRESS MODE : DHCP
RENEW DHCP IP ADDRESS
VIEW NETWORK SETTINGS
TEST NETWORK CONNECTION
BACK
Schermmenu's
Menù sul display (OSD)
Menyer
Экранные меню
MAIN MENU
INPUT SETUP
AUDIO CONFIGURATION
SPEAKER CONFIGURATION
SPEAKER DISTANCE SETUP
SUBWOOFER SETUP
SPEAKER LEVEL SETUP
VIDEO SETUP
SYSTEM SETUP
EXIT
SPEAKER CONFIGURATION
FRONT : Large
CENTER : Large
SURROUND : Large
SUBWOOFER : Yes
OVERHEAD/HIGH : Overhead
CENTER BACK : 2 Large
CEILING FRONT : Large
CEILING REAR : Large
ADVANCED SETUP
BACK
ADVANCED SPEAKER SETUP
SPEAKER : Front
CROSSOVER : 100Hz
DOLBY : Default
DTS : Default
STEREO : Default
BACK
SUBWOOFER SETUP
DOLBY : 0dB
DTS : 0dB
STEREO : 0dB
MULTI LPCM : 0dB
MULTI INPUT : 0dB
BACK
POWER OPTION
AUTO POWER DOWN TIMER : Disable
MAX POWER ON VOLUME : 45
POWER MODE : Normal
SIGNAL SENSE INPUT : Disable
BACK
SOFTWARE INFORMATION
MAIN SOFTWARE :
V 00.00
DSP SOFTWARE :
V 00.00.00
STANDBY SOFTWARE :
V 00.00
HDMI SOFTWARE :
V 00.00.00
CHECK FOR SOFTWARE UPDATE
BACK
13
SPEAKER DISTANCE SETUP
FRONT LEFT : 10.00 FT 3.05M
CENTER : 10.00 FT 3.05M
FRONT RIGHT : 10.00 FT 3.05M
SURROUND RIGHT : 10.00 FT 3.05M
CENTER BACK RIGHT : 10.00 FT 3.05M
CEILING FRONT RIGHT : 10.00 FT 3.05M
CEILING REAR RIGHT : 10.00 FT 3.05M
CEILING REAR LEFT : 10.00 FT 3.05M
CEILING FRONT LEFT : 10.00 FT 3.05M
CENTER BACK LEFT : 10.00 FT 3.05M
SURROUND LEFT : 10.00 FT 3.05M
SUBWOOFER : 10.00 FT 3.05M
BACK
SPEAKER LEVEL SETUP
FRONT LEFT :
0dB
CENTER :
0dB
FRONT RIGHT :
0dB
SURROUND RIGHT :
0dB
CENTER BACK RIGHT :
0dB
CEILING FRONT RIGHT :
0dB
CEILING REAR RIGHT :
0dB
CEILING REAR LEFT :
0dB
CEILING FRONT LEFT :
0dB
CENTER BACK LEFT :
0dB
SURROUND LEFT :
0dB
SUBWOOFER :
0dB
BACK
VIDEO SETUP
STANDBY VIDEO SOURCE : Disable
FAST AUDIO SYNC : Disable
OSD FORMAT : 480P
BACK
SYSTEM SETUP
LANGUAGE : English
IR REMOTE CODESET : Codeset 1
DISPLAY : HDMI and TFT
TFT BRIGHTNESS : 0
NETWORK WAKEUP : Disable
POWER OPTION
NETWORK CONFIGURATION
SOFTWARE INFORMATION
RESTORE FACTORY DEFAULT
BACK
RESTORE FACTORY DEFAULT
ERASE ALL SETTINGS!
BACK

Publicité

Table des Matières
loading

Table des Matières