Technical Specifications - Boston Scientific DBS Vercise Mode D'emploi

Technical Specifications

Directional Lead
Table 1: DBS Directional Lead
Lead Boot
The Lead Boot protects the proximal end of the Lead prior to the Stimulator implant surgery. The setscrew,
when engaged, secures the Lead in the Lead Boot.
Table 2: DBS Lead Boot
Suture Sleeves
If a mini plate is used, the Suture Sleeve is placed between the Lead and the mini plate to protect the
Lead. The Suture Sleeve may also be used to anchor the Lead or DBS Extension to the fascia.
Table 3: DBS Suture Sleeves
Feature
Tip Length
Contact Length
Contact Spacing (axial)
Lead Diameter
Overall Length
Outer Tubing Material
Contact Material
Feature Specification
Overall Length
3.3 cm
Setscrew Titanium
Connector Block Stainless Steel
End Stop Stainless Steel
Insulation Material Silicone
Description
Part
Overall Length 1 cm, 2.3 cm, 4 cm
Material Silicone
Technical Specifications
Specification
1.5 mm
1.5 mm
0.5 mm
1.3 mm
30 cm or 45 cm
Polyurethane
Platinum/Iridium
Vercise™ DBS Directional Lead
90930938-02 REV A 7 of 247