Status Report; Changing The Device Name; Important - Conrad GX101 Notice D'emploi

9.6 Status report

The GSM switching module can send a status report SMS.
To receive the status report by SMS, send the following SMS command (do not enter the quotation
marks): "Status"
The status report SMS contains the following information:
GX101 Device name. Also see chapter: "9.7 Changing the device name"
IN1=H, IN2=H Status of the inputs: "H" = "HIGH", "L" = "LOW"
SMS1=L Status of the "SMS1" relay output: "H" = activated, "L" = deactivated
ANRUF=L Status of the "INCALL" relay output: "H" = activated, "L" = deactivated
PEGEL=9 Possible value from 0 to about 30; signal strength; also see chapter "9.10 Signal
strength query"
UB=3700mV Operating voltage in mV
-ENDE- End of status report

9.7 Changing the device name

The device name can be changed freely. To change the device name, send the following SMS
command (do not enter the quotation marks): "Name=xxxxxxxxxxxxxxxx,".
The string "xxxxxxxxxxxxxxxx" stands for the device name, e.g. "GX101".

Important!

Enter a comma ( , ) at the end of the device name. Thanks to the comma, space
characters can be included in the device name.
The device name can consist of up to 16 characters.
The default device name is "GX101".
42