Activating/Deactivating The "Sms1" Output (8); Receiving Error Messages Via Sms - Conrad GX101 Notice D'emploi

9.4 Activating/deactivating the "SMS1" output (8)

The potential-free "SMS1" relay output (8) (N.O.; max 8 A at 250 V/AC or 24 V/DC) can be activated
or deactivated via SMS.
Activating the "SMS1" relay output (8)
To activate the "SMS1" relay output (8), send the following SMS command (do not enter the quotation
marks): "SMS1=1"
Deactivating the "SMS1" relay output (8)
To deactivate the "SMS1" relay output (8), send the following SMS command (do not enter the
quotation marks): "SMS1=0"
Activating/deactivating SMS confirmation after switching operation
If you want to receive an SMS confirmation when the "SMS1" relay output (8) has switched, send the
following SMS command (do not enter the quotation marks): "Antwort-1"
If you do not want to receive an SMS confirmation when the "SMS1" relay output (8) has switched,
send the following SMS command (do not enter the quotation marks): "Antwort-0"

9.5 Receiving error messages via SMS

The GSM module can generate and send an error message by SMS reading "(device name) Fehler"
when a received SMS command is unknown or incorrect. Such an SMS is returned to the sender of
the SMS command in case of an error.
Activating error messages:
To receive error messages by SMS, send the following SMS command (do not enter the quotation
marks): "Fehler=1"
Deactivating error messages:
To receive no error messages by SMS, send the following SMS command (do not enter the quotation
marks): "Fehler=0"
Example:
You send the SMS command "SRSO" which is unknown to the GSM switching module. You receive
a response if error messages are activated (see above "Activating error messages"): "GX101 Fehler"
41