Delivery Specifications; Important; Safety Precautions; Technical Specifications - Storch PYTHON TMR 55-80-140 Mode D'emploi

GB
Thank you for your confidence in STORCH.
You have chose a quality product.
If you would like to suggest an improvement, or do
experience a problem with your product, please do not
hesitate to contact us. Please contact your field sales
representative or, in urgent cases, contact us directly.
Yours sincerely,
STORCH Service Department
Tel. +49 (0) 2 02 . 49 20 - 112
Fax +49 (0) 2 02 . 49 20 - 244
Free service hotline:
Free order hotline:
Free order fax:
(only available in Germany)

Delivery specifications:

Turbine with speed control, 2 spare air filter pads, 7 metre
connecting cable, 7 metre air hose, 1 litre siphon cup gun
with red air cap and 1.3 mm nozzle, 1.7 mm nozzle, 2.5
mm nozzle, blue air cap, assembly spanner

Technical specifications:

Electrical connection:
Motor:
Speed control:
Air flow capacity:
Working pressure:
Air hose:
Connecting cable:
Weight:
08 00. 7 86 72 47
08 00. 7 86 72 44
08 00. 7 86 72 43
230 V / 50 Hz
1,4 kW
infinitely variable
1035 – 1900 L/min
0,13 – 0,31 bar
7 metres
7 metres
5.5 kg

IMPORTANT:

PLEASE READ THIS SECTION BEFORE USING THE
DEVICE.
This manual contains important warnings and
instructions.
Please read it and keep it safe for future reference.
This device should only be operated when it is properly
earthed.

Safety precautions:

Safety precautions: Safety precautions: Safety precautions: Safety precautions:
The device possesses a voltage range which can
pose an electrical hazard to humans and animals.
This should only be screwed and / or disassembled
by authorised personnel.
Similarly, maintenance and repair work should only be
conducted by electrical specialists and authorised service
centres.
The buyer / user operates the device at their own risk and
under their own responsibility.
When working with flammable materials there is a
risk of fire or explosion.
The following information must be thoroughly read
and understood to ensure safe operation of your spray
equipment:
- Ensure the spray area is always well ventilated.
The turbine itself should be set up at least 7 m
from the spray area.
- Always observe the safety regulations and warnings
issued by the paint or solvent manufacturer.
- Never spray flammable material in close proximity
to open flames, pilot lights or other sources of
ignition.
- When spraying always wear eye protection and a
suitable spray mask.
- Never make changes or modifications to the
device, as this could cause result in a malfunction.
- When conducting maintenance work disconnect the
device from the mains supply.
CAUTION:
To prevent the risk of electric shock do not store
the device outdoors or expose it to any moisture.
2 8 2 8 2 8
2 8 2 8