Mechanical Safety Devices; Electrical Safety Devices; Vibrations; Machine Functional Specifi Cations And Make Up - BIANCHI VENDING EP 4100 BIANCHI M Manuel D'emploi Et Entretien

3.3 Mechanical safety devices

· Complete safety and protection panelling on all hot machine
parts and on the hot water and steam generator.
· Work surface with grid and liquid collection tray.
· Safety valve on the heater.

3.4 Electrical safety devices

· Low-voltage keypad controls
· Clixon temperature overload safety switch
· Thermal overload protection disks, on the dispensing pump
motor and on the boiler load pump motor.
· Thermal overload protection on the resistance elements
3.5 Acoustic noise
Sound pressure levels amounting to 70 db(A) are not normally
exceeded on the machine operation site.

3.6 Vibrations

The machines are equipped with vibration-proof rubber feet.
In standard working conditions, the machines do not generate
dangerous vibrations, neither for the operator nor for the envi-
ronment.
3.7 Machine functional specifi cations and make up
The EP 4100 BIANCHI M machine is available with the following
feature confi guration:
· 2 steam wand
· 1 central hot water automatic dosage drawing spout
· 2 coffee dispensing groups

4. TRANSPORT

4.1 Packing

The machine is delivered in one single cardboard package, with
internal expanded polystyrene safety padding inserts.
The packing is provided with conventional symbols to be accurately
observed during package handling and storing operations.
During transport the package must be kept in a consistently ver-
tical position.
Do not turn upside down or onto one side.
Transport carefully avoiding bumps and impacts and exposure to
bad weather.

4.2 Inspection on delivery

Upon delivery, check to see that the machine complies exactly with
the description provided on the transport documents, accessories
included.
Check to see that the machine has not been subject to transport
damages. If it has, immediately report the occurrence to the
forwarder as well as to our customer service department.
Potentially hazardous machine packing material must strictly not
be left on hand for access by children.
Do not disperse the packing material in the environment but en-
sure that it is accurately disposed of via appropriate packing and
waste recycling facilities.

5. INSTALLATION

The machines are fi tted with height-adjustable feet. Ensure that
height is adjusted identically for all the four base feet.
The positioning support surface must be evenly levelled, dry,
strong and stable, to be positioned at a height of at least 110 cm
from the fl oor.
For correct machine operations it is not necessary to anchor it to
the support surface and neither are technical devices required to
limit vibrations.
It is hereby recommended that some free space is left all around
the machine, to make use and maintenance operations quick
and easy
Do not install the machine if it is wet or moist and wait until the
machine is surely and completely dry. Prior inspections by the
service personnel are anyway necessary, to warrant that the ma-
chine's electrical components are not damaged.
Have the installation personnel install a coffee grounds collector
tray for collection of the used coffee pods.
Fig. 5.1
23