Description Of Machine Operation - Tecno-gaz DEA Manuel De L'utilisateur

ENGLISH
12

DESCRIPTION OF MACHINE OPERATION

First connect and put the machine into service as described in paragraph 9.
Press the master switch (A) positioned at the back of the heat-sealing machine.
The red LED (B) installed on the machine front starts flashing to indicate that the machine has been
activated and the temperature is rising towards the sealing threshold.
When the correct sealing temperature is reached, the red flashing LED becomes steady and turns green.
A
B
Introduce the edge of the paper to be sealed (C) in the rear opening.
Let the paper run until the length protruding from the front opening matches the size of the bag required (D).
The film can be fitted with the film facing either upwards or downwards.
C
D
27