External On/Off Switch (Option) - Tylo Sense Combi-U 7 Notice D'installation Et D'utilisation

8
Fig 17: Wiring through the wall - Combi Pure.
Fig 18: Wiring through the wall - Combi Elite.
Unusual voltages/numbers of phases
Contact Tylö Customer Service before connecting to voltages or
numbers of phases that are not listed in the wiring diagram Figure
19.

External ON/OFF switch (option)

The external ON/OFF switch can be positioned anywhere outside
the sauna, not to exceed 75 feet from the heater, to avoid voltage
loss in the cable. Voltage loss aff ects the LED indicator for heater
status (if built-in and connected to the switch).
For further information, see instructions supplied with the control
panel.