Thap Sets - SKF THAP 030E Mode D'emploi

6. THAP sets

The THAP sets consist of the components shown in the table below.
Designation
THAP 030E/SK1
Note: A pressure gauge is not included.
Use pressure gauge 1077587, 0-100 MPa (0 - 14 500 psi), available separately.
Designation
THAP 150E/SK1
Designation
THAP 300E/SK1
Designation
THAP 400E/SK1
SKF THAP 030E 150E 300E 400E
Set contents
1x THAP 030E
1x 228027 E
1x 729834
1x 729831 A
1x 729832 A
Set contents
1x THAP 150E
1x 228027 E
1x 729834
1x 729831 A
1x 729832 A
1x 1077589
Set contents
1x THAP 300E
1x 1077589/3
1x 227957 A/400MP 2 m (6.5 ft) high pressure pipe
Set contents
1x THAP 400E
1x 1077589/3
1x 227957 A/400MP 2 m (6.5 ft) high pressure pipe
air-driven oil pump
adapter nipple
flexible pressure hose
coupling
nipple
air-driven oil pump
adapter nipple
flexible pressure hose
coupling
nipple
0 - 300 MPa (43 500 psi) pressure gauge
Air-driven oil injector
0 - 400 MPa (58 000 psi) pressure gauge
Air-driven oil injector
0 - 400 MPa (58 000 psi) pressure gauge
13