Presentation Of The Ql Boat Trim System - Volvo Penta QL Boat Trim System Instructions D'utilisation Et D'installation

Presentation of the QL Boat Trim System

The system comprises:
A. Control Unit
B. Control Panel
C. Interceptor Units
D. Cable between Control Unit and Interceptor Unit
E. Cable between Control Unit and Control Panel
The system is designed for planing boats, max boat
speed of 50 knots (57 miles/h). The system can also be
used on semi-planing boats, see sizing guide lines.
The Interceptor units are available in two lengths, 300
mm and 450 mm. They can be installed individually or
side by side, i.e. two units on each side of the transom
(300 + 300, 300 + 450 or 450 + 450).
Fig. 1
A
D
D
C
C
Control unit (A)
The control unit is the brain of the system, and is availa-
ble in two versions, one for 1 pair of Interceptors and one
for 2 pairs of Interceptors. Ambient operating temperatu-
° °
re: Min -40 C, Max +85 C.
Length Width
(mm) (mm)
180 35
Plus d'informations sur : www.dbmoteurs.fr
Fig. 2
Control panel (B)
The control panel is equipped with 4 push buttons for
smooth operation of the trim system. For push button
functions, see Operating the system. The panel is also
equipped with two rows of LEDs for exact trim indication.
Length
(mm)
B
83
* Surface mounted, see fig 22 (A).
Fig. 3
E
Interceptor unit (C)
Two different sizes are available.
Length
(mm)
300
450
Height
(mm)
** Outside transom.
41
Each interceptor unit is supplied with necessary stain-
less steel screws, for installation in fibre-glass hulls.
Note! Maximum stroke of the Interceptor blade is
35 mm.
41 mm
35 mm
Width
(mm)
68
13 mm
max. 20 mm
Width
(mm)
100
100
180 mm
Height Hole
cutting
(mm) (mm)
13 52*
68 mm
52 mm
52 mm
Height
(mm)
42**
42**
5