Cleaning
Only use cold cleaner to clean the lifting device. (Do not use mineral spirits or corrosive liquids. This causes leaks or
irreparable damage to the hoses.) The suction plates can be cleaned using soap and warm water. Do not use cleaning
solvents on the suction sealing lips.
Spare parts
We offer a warranty for original spare parts supplied by Probst GmbH only.
Pribst GmbH is not liable for any damage resulting from the use of non-original spare parts or accessories.
When ordering spare parts, please specify the order number, serial number of the lifting device and part number of the
part (see the type plate and replacement parts list).
10
Decommissioning and Disposal
The lifting device may only be decommissioned and prepared for disposal by qualified specialists.
Procedure:
1.
Disconnect lifting device from transportation or other lifting device.
2.
Discharge battery and dispose of properly (see section 9.2).
3.
Detach and dispose of the suction cups.
4. Release the hose clamps and remove the hoses.
5.
Detach and dispose of the base body.
For proper disposal, please contact a company specializing in the disposal of technical goods and instruct the company to
observe current disposal and environmental regulations.
The manufacturer of the device will be happy to assist you in finding a suitable company.
43/43