Removing The Lifting Device From The Pallet; Start Of Operation; Tool List; Fastening Lifting Device - probst STONEMAGNET SM-600-GREENLINE Instructions D'emploi

Removing the lifting device from the pallet

The packaging must be opened carefully.
Take care not to damage any of the components when opening the packaging with knives or blades.
Now carefully remove the lifting device.
CAUTION
CAUTION
5

Start of Operation

The following operating steps must be checked by a qualified employee before the
starting for the first time and section 1.10 (Requirements and instructions for
installation, maintenance and operating staff) must be read.

Tool list

No tools are required for installation.

Fastening lifting device

WARNING
24/43
Heavy components on the pallet
Take care when opening the packaging as parts may have slipped and
could fall. This can cause crushing wounds and lacerations.
►
Wear protective footwear (S1) and
work gloves (safety category 2133).
Improper removal of system from the transportation box
System damage
►
Do not apply force
Observe the instructions for removing the system from the transportation
►
box.
Risk of load breaking off due to incorrect mounting
Falling parts could hit people in the vicinity, causing death or serious injury!
►
The lifting device may only be lifted on the suspension eye.
►
The permissible load capacity of the transportation or lifting device (e.g.
crane, chain hoist, construction vehicle, etc.) and the hoist must be high
enough at least to be equal to the combined weight and load capacity of
the lifting device.
►
The transportation or lifting device used and the hoist must be in perfect
working condition.