Assembling The Unit - Elite RealAxiom Wireless Mode D'emploi

• The Ritmo feet (Ref. E) simulate faithfully real-
life riding conditions by following the shifting of
the weight of the athlete.
A quick and easy to use regulator adjusts the
shock absorbing tension of the feet.
- Turning the regulator clockwise coils the spring,
making the mechanism rigid (Fig. 5).
- Turning the selector counter-clockwise uncoils
the spring, making the mechanism soft. Pay care-
ful attention never to exceed the MIN level (Fig. 6).
E
E
A
525 ± 2
525 ± 2
• Illustration 7 shows how to fit the unit (Ref. B) to
the stand (Ref. A) .
CAUTION: THE FLYWHEEL OF THE UNIT IS VERY
HEAVY. EVEN MINOR IMPACTS COULD BEND
THE SHAFT AND MAKE THE ENTIRE SYSTEM
UNUSABLE.
E
E
4a
• Use M6 X 16 (Ref. B) bolts and Ø6xØ14 (Ref. R)
washers to fix
the unit as shown
in illustration 8.
The pair of holes
on the resistance
unit
allows
adjustment
the
unit (Ref.P).
Before
the unit make
sure
stand is perfectly
positioned on the
floor, completely
opened, and that the support plate is horizontal.
TAKE CARE, AS THE UNIT IS VERY HEAVY
AND COULD CAUSE THE STAND TO CLOSE.
4b
F
5

ASSEMBLING THE UNIT

plate
lateral
of
resistance
fitting
that the
EN
F
6
7
A
R
8
P
27