Explanation Of Display Items - Tunturi FitRun 90i PRO Manuel De L'utilisateur

Speed hot keys:
Speed Hot Keys are set as: 6, 8 & 10 km/h.
For example, the speed changes from any speed to 8
KPH by pressing the Speed Hot Key 8.
Mode
- Select Countdown program mode, Knowing:
Time Countdown
Distance Countdown
Calorie Countdown
Step Countdown
Manual
- Select the program mode "Manual" quickly (P-1)
HRC
- Select the program mode "HRC" quickly.
Interval
- Select the program mode "Interval " quickly. (P-2)
Lose weight
- Select the program mode "lose weight" quickly."
(P-3) quickly.
Walk
- Select the program mode "Walk" (P-4) quickly.
Run
- Select the program mode "Walk" (P-5) quickly.

Explanation of display items

Speed
- Shows the actual treadmill speed in workout mode.
Display range: 0.8~20.0 km/h.
Pulse
- Shows the pulse rate when holding both HR
handgrips, or wear compatible chest strap (5Khz).
Display range: 50~200 bpm.
Distance
- Shows the ran distance workout mode.
- Shows remaining distance when being in
countdown mode. When reach goal display will
show "END".
- Display range: 0.00~99.99 km.
When reached maximum display distance, the
counting will start over again.
NOTE
• This parameter will only count when walking/
running on the treadmill. This is because of the
build in movement sensing system.
30:00
1:00
50.0
5000
2 7
Time
- Shows the ran time in workout mode.
- Shows remaining time when being in countdown
mode. When reach goal display will show "END".
- Display range: 0:00~18:00 hours.
When reached maximum display time, the counting
will start over again.
Calories
- Shows the consumed calories in workout mode.
- Shows remaining calories when being in countdown
mode. When reach goal display will show "END".
- Display range: 0.0~999 K.Calories.
When reached maximum display calories, the
counting will start over again.
NOTE
• This parameter will only count when walking/
running on the treadmill. This is because of the
build in movement sensing system.
• This data is a rough guide for comparison of
different exercise sessions which cannot be used
in medical treatment.
Incline
- Shows the actual treadmill incline in workout mode.
Display range: 0.0~15 (steps)
Pace
- Shows based on the current speed how long it will
take in minutes to run 1km distance.
NOTE
• This parameter will only count when walking/
running on the treadmill. This is because of the
build in movement sensing system.
Steps
- Shows the actual running steps.
- Shows remaining steps when being in countdown
mode. When reach goal display will show "END".
- Display range: 0~99999 steps.
When reached maximum display calories, the
counting will start over again.
NOTE
• This parameter will only count when walking/
running on the treadmill. This is because of the
build in movement sensing system.
Matrix
- Displays running speed and incline profile for the
selected program.
Each speed window block is equal to 2 km/h.
Each incline window block is equal to 2 steps.
English