Warranty Limitations; Cleaning And Maintenance; Lubrication (Fig. F-4); Belt And Running Deck - Tunturi FitRun 90i PRO Manuel De L'utilisateur

English

Warranty limitations

This warranty covers manufacturing defects in the
fitness equipment as originally packed by Tunturi
New Fitness BV. The warranty shall apply only under
conditions of normal, recommended use of the product
as described in the Owner's Manual and providing that
Tunturi New Fitness BV's instructions for installation,
maintenance and use have been complied with. Neither
Tunturi New Fitness BV's nor the Tunturi Distributors'
obligations apply to defects due to reasons beyond
their control. The warranty applies only to the original
purchaser and is valid only in countries where Tunturi
New Fitness BV has an authorised importer. The
warranty does not extend to fitness equipment or
components that have been modified without the
consent of Tunturi New Fitness BV. Defects resulting
from normal wear, misuse, abuse, corrosion, or damage
incurred during loading or transportation are not
covered.
The warranty does not cover sounds or noises emitted
during use where these do not substantially impede the
use of the equipment and where they are not caused by
a fault in the equipment.
The warranty does not cover defects arising from the
failure to carry periodic maintenance as outlined within
the Owner's Manual for the product. Furthermore, the
warranty does not cover defects arising from usage and
storage within an unsuitable environment as described
within the Owner's Manual which should be indoors,
dry, dust and grit free and within a temperature range
of +15°C to +35°C. The warranty does not cover
maintenance activities, such as cleaning, lubricating,
and normal part adjustments, nor installation
procedures that customers can accomplish themselves,
such as changing uncomplicated meters, pedals and
other similar parts not requiring any dismantling/
reassembling of the fitness equipment. Warranty
repairs carried out by other than authorised Tunturi
representatives are not covered.
Failure to follow the instructions given in the Owner's
Manual will invalidate the product's warranty.

Cleaning and maintenance

WARNING
• Before cleaning and maintenance, remove the
mains plug from the wall socket.
• Do not use solvents to clean the equipment.
- Do not block the ventilation openings. Keep the
ventilation openings clear from dust, dirt and other
obstructions.
- Clean the equipment with a soft, absorbent cloth
after each use.
- Clean the visible parts of the equipment with a
vacuum cleaner with a small suction nozzle
- Regularly check that all screws and nuts are tight.

Lubrication (fig. F-4)

The running belt must be checked for lubrication
condition regularly. Therefore the treadmill comes with
a 300 hours reminder function. The "TIME WINDOW"
will display "OIL" and will make an acoustic beeping
sound every 10 seconds to remind you. Follow the
below checking procedure and eliminate the "OIL"
message and acoustic warning signal by pressing and
hold the "STOP" button for at least 3 seconds during
this warning signal.
CAUTION
• We recommend to check the running belt
lubrication at least once every month, as more
factors than time can be effective to the lubricant
conditions.
• Only lubricate the running belt if necessary. If
you apply too much lubricant, the running belt
will slip easily due to lack of friction.
WARNING
• Before lubrication, remove the mains plug from
the wall socket.
- Stand steadily on the running belt.
- Take hold of the front handlebar and push the
running belt with your feet so that it slides back and
forth. The running belt must move smoothly and
evenly without making sound.
- If the running belt does not move smoothly and
evenly or if the running belt does not move at all,
touch the underside of the running belt with your
fingertips to check the lubrication:
• If you feel lubrication or your fingertips are shiny,
there is sufficient lubrication on the running belt.
• If you do not feel lubrication or your fingertips
are dusty or rough, apply lubricant (15-20 ml)
in the middle of the running deck under the
running belt and let the equipment operate at
5km/h for at least 5 minutes.
• After lubrication, do not fold the equipment
before having done a workout for 20 minutes
with a speed of at least 5 km/h. The lubricant will
be spread evenly over the running belt.

Belt and Running Deck

Your treadmill uses a very high-efficient low-friction
bed. Performance is maximized when the running deck
is kept as clean as possible. Use a soft, damp cloth or
paper towel to wipe the edge of the belt and the area
between the belt edge and frame. Also reach as far as
3 0