7.2 Network configuration
This page is used to configure the clock on the network. The warning indicates that the clock might
lose network connectivity if the settings are incorrect.
The following information is displayed:
• MAC Address: This is the clock's MAC address. This address is unique to each device.
This number is indicated on a label on the back of the Bodet clock.
• Name: User-defined clock name.
• Enable DHCP checkbox: If checked, the device's network IP settings will be configured
automatically.
If this box is unchecked, the following settings are available:
• IP Address: Manually sets the device's IP address (required).
• Subnet Mask: The subnet mask associates a clock with the local network (required).
• Gateway: The gateway can be used to connect the clock to two data networks.
• DNS Address: This can be used to associate a domain name with an IP address. This avoids
having to enter an IP address in the browser as a user-defined name can be used instead.
For example: www.bodet.com is easier to remember than 172.17.10.88.
saves your configuration and reboots the clock.
EN
19