Parameters - Bodet Style 5 Notice D'installation Et De Mise En Service

7.4 Parameters

This page allows you to set the clock display on the network.
The information displayed is described below:
• Luminosity: Used to set clock brightness between 4 levels from 1 (low) to 4 (high).
Default brightness is 2.
• Mode 12H/24H: Used to display the time in 12- hour or 24-hour mode.
Example: 8:00 (in 12-hour mode) or 20:00 (in 24-hour mode).
• Eco Mode: Used to enable the clock's energy-saving mode. In Eco mode, the clock
displays the flashing colon and is set to minimum brightness (level 1). This mode is set for
a period configured below (ON & OFF Time). This mode is disabled if the user opens the
configuration menu (using the "S" and "+" keys) or changes the settings on the web server
or if the clock is rebooted.
• ON & OFF Time: Used to define the period when Eco mode is enabled. This mode is only
enabled when the status changes. Example: if Eco mode is set at 8:30 for 8:00 (day D),
the clock switches to this mode at 8:00 on the following day (D+1).
• Language: Only available on Style 7 Date. This parameter displays the default language of
the Style 7 Date. Two drop-down menus are available to switch languages.
• Central Display: Only available on Style 7 Date. This parameter allows you to choose the
information that will be displayed on the centre line. It is possible to display the alternation
of week number and selected centre information.
is used to save any settings made on this page.
22
EN