EN
5.2 Network configuration page
This page is used to configure the clock on the network. The warning indicates that the clock might
lose network connectivity if the network settings are incorrect.
The information displayed is described below:
- MAC Address: this is the clock's MAC address. This address is unique to each device. This
number is indicated on the clock's Ethernet port.
- Name: user-defined clock name.
- Enable DHCP checkbox : used to automatically define the product's IP settings on the network.
If this box is unchecked, the following settings may be accessed:
- IP Address: lets you set the device's IP address manually. (required)
- Subnet Mask: the subnet mask associates a clock with the local network.
(required)
- Gateway: the gateway can be used to connect the clock to two data networks.
- DNS Address: this can be used to associate a domain name with an IP address. This avoids
having to enter an IP address in the browser as a user-defined name can be used instead.
For example, www.bodet.com is easier to remember than 172.17.10.88.
The Save and Reboot button is used to save your settings and reboot the clock.
43