Maintenance Menu; Maintenance Menu - All Models Except Style 7D-7E-10D-10Sd - Bodet Style 5 Notice D'installation Et De Mise En Service

XI

– Maintenance menu

To access the maintenance menu, open the configuration menu by pressing and holding "S" then
"+" for 3 seconds. Release both keys, then press and hold "S", then "+" again for 7 seconds.
11.1 Maintenance menu – all models except Style 7D-7E-10D-10SD
+
S
+ Hold down for 3 seconds
Open configuration menu
+
S
Hold down for 7 seconds
+
Software version
S
+
S
+
S
+
S
+
S
Display test (tests for correct functioning of all LEDs)
S
End of menu
Select synchronisation mode: NTP or independent NTP
(The clock continues to work on its internal quartz.)
+
+ +
...
Resetting the clock (enabled when "rstY" is selected)
Restore to factory settings (enabled when "dF Y" is selected)
+ +
Set the T° offset
...
(Style 10-10S)
EN
29