Assembling The Pump Set - Medela Swing maxi Mode D'emploi

6. Preparing for pumping
Caution
18
l Wash hands thoroughly (at least one
minute) with soap and water before
touching the breast and pump parts.
Note
l Use Medela original accessories
only.
l Check pump set components for
wear or damage before use and
replace if necessary.
l All components must be completely
dry before use.
i
Info
l Carry out all the steps with care and
assemble the pump set correctly.
Otherwise a good vacuum may not
be achieved.
6.3 Assembling
the pump set
1
Carefully insert the light yellow
membrane into the base of the
breast shield.
4
Screw bottle into connector.