Playing a guitar while playing back a song
on audio players
Use a commercially available
stereo miniature plug cable that
is appropriate for the device .
MEMO
When instruments are connected to the INPUT 2 (GUITAR/
MIC) jack and the INPUT 2 (AUX) jack, only the instrument
connected to the INPUT 2 (AUX) jack can be used .
Switching the Play Mode
You can change how the songs are played .
Display
Explanation
The current song plays to the end and then stops .
Playback of the current song is repeated .
Songs in the song list are played back in order . *
Songs in the song list are played back in order . Playback
continues until the [ ] (Stop) button is pressed . *
Songs in the song list are played back randomly . *
Songs in the song list are played back randomly .
Playback continues until the [ ] (Stop) button is pressed . *
Time location "A" is registered ("Repeating Playback of a
Specified Segment (AB REPEAT)" (p . 12)) .
Playback will repeat between time locations "A" and "B"
("Repeating Playback of a Specified Segment (AB REPEAT)"
(p . 12)) .
MEMO
When you select a Play Mode marked with an asterisk (*), the
current song will be played to the end and stop if a screen other
than "Top Screen" (p . 4) is displayed .
Tuning
Digital audio player,
etc .
Play the Guitar with Songs as Your Backing
Use the tuner in the JS-10 to tune the guitar or bass connected to
INPUT 1 or INPUT 2 .
1.
Press the [TUNER] button .
The TUNER screen appears .
PITCH
Set the frequency of A4 (the middle A on a piano keyboard) .
2.
Adjust the tuning until the desired pitch is
shown and both triangles are lit .
Display
Explanation
Too low
Tuned
Too high
MEMO
The [TUNER] button will be lit when it is tuned .
Standard tuning
7th
6th
5th
Guitar
B
E
Bass
4th
3rd
2nd
1st
A
D
G
B
E
B
E
A
D
G
9