Boss eBand JS-10 Mode D'emploi page 31

About the SD card write protect function (LOCK)
The contents of the SD card can be
protected by write protecting it . To write
protect a card, slide the write protect
switch on the side of the SD card to
the "LOCK" position . To use the JS-10
functions, release the LOCK .
Initializing an SD card (FORMAT)
This procedure lets use the commercially available SD cards in the
JS-10 .
NOTE
• The supplied SD card cannot be initialized (formatted) using the
JS-10, to protect its content . If you initialize the supplied SD card
with your PC, songs, USB drivers, and eBand Song List Editor on
the card will all be lost . Song protection settings will be ignored .
• Since there is no way to recover data after initialization, be sure
to back up any important data before initializing the card (p . 20) .
1.
Follow this sequence of steps: [MENU] button 
"SYSTEM"  [ENTER] button  "SD CARD FORMAT" 
[ENTER] button .
The SD CARD FORMAT screen appears .
2.
Press the [ENTER] button .
The message "Are you sure?" appears .
3.
To initialize the SD card, follow this sequence of steps:
"OK"  [ENTER] button .
The SD card will be initialized .
MEMO
Follow the procedure below to copy data from one SD card to
another freshly initialized SD card .
3-1.
Back up the first SD card (p . 20) .
3-2.
Restore the backed up data to the new SD card
(p . 20) .
Write protect switch
Convenient Functions
29