Enabling Auto Off; Listing The Files On The Sd Card As A Song List; Selecting The Sound Output From The Usb Computer; Port - Boss eBand JS-10 Mode D'emploi

Convenient Functions

Enabling Auto Off

The JS-10 powers off automatically when there is no performance
or operation for 30 minutes (default factory setting) . You can
change how long the JS-10 can remain inactive before it powers off
automatically .
NOTE
The settings will be lost if the power is turned off while editing .
Save the settings in advance to prevent this from happening .
1.
On the MENU > SYSTEM screen, follow this sequence of
steps: "SETTING"  [ENTER] button .
Specify the setting for AUTO OFF .
AUTO OFF Explanation
OFF Auto off is disabled .
10MIN, 30MIN,
Set how long (in minutes) the JS-10 can remain inactive
240MIN before it powers off automatically .
Listing the Files on the SD Card as a Song
List
You can change the setting to display the files saved on the SD card
as a list in the SONG LIST screen .
1.
On the MENU > SYSTEM screen, follow this sequence of
steps: "SETTING"  [ENTER] button .
Specify the setting for SD VIEW .
SD VIEW Explanation
OFF This setting is the default factory setting .
"SD CARD" is displayed on the SEARCH screen in SONG
ON LIST . If you select "SD CARD, " files saved on the SD card
are displayed as a list .
Selecting the Sound Output from the
USB COMPUTER Port
You can choose to output only the sound input from the INPUT 1
(GUITAR/MIC) jack or the INPUT 2 (GUTAR/MIC) jack from the USB
COMPUTER port or to output a mixed sound created by input from
the INPUT 2 (AUX) jack and the USB COMPUTER port (p . 38) .
1.
On the MENU > SYSTEM screen, follow this sequence of
steps: "SETTING"  [ENTER] button .
Specify the setting for USB AUDIO OUT .
USB AUDIO OUT Explanation
Outputs sound that is input to the INPUT 1 (GUITAR/
INPUT
MIC) jack or the INPUT 2 (GUITAR/MIC) jack only .
Mixes and outputs all sounds that are input to the
INPUT 1 (GUITAR/MIC) jack, the INPUT 2 (GUITAR/MIC)
ALL
jack, the INPUT 2 (AUX) jack, and the USB COMPUTER

port .

26

Initializing an SD Card (FORMAT)

This procedure lets you the commercially available SD cards in
the JS-10 .
Refer to "Initializing an SD card (FORMAT)" (p . 29) .
Returning the JS-10's Settings to Default
Factory Settings
Here's how to restore the parameters in the JS-10 to their original
default factory settings .
1.
On the MENU > SYSTEM screen, follow this sequence of
steps: "FACTORY RESET"  [ENTER] button .
The FACTORY RESET screen appears .
2.
Select the parameter (add checkmark) whose settings you
want to restore to the default factory settings .
ALL
Restores all parameters
to their default factory
settings .
SYSTEM
Restores the system
parameters to their
default factory settings .
USER PATCH
Restores the user effect patches to
their default factory settings .
NOTE
If you restore the default factory settings for the selected
parameters, previously saved settings will be lost .
3.
Press the [ENTER] button .
The message "Are you sure?" appears .
4.
To return to the default factory settings, follow this
sequence of steps: "OK"  [ENTER] button .
The settings will return to the default factory settings .
Specify the range of user
patches to be restored to
their default factory settings .