Top Panel / Side Panels; Top Screen - Boss eBand JS-10 Mode D'emploi

Masquer les pouces Voir aussi pour eBand JS-10:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 92
Panel Descriptions

Top Panel / Side Panels

USB cap holders
Place caps detached from the USB
MEMORY port or USB COMPUTER
port here .
DC IN jack
Connect the supplied
AC adaptor .
Power cord
AC adaptor
To power outlet
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections .
* Never insert or remove SD cards or SDHC cards while this unit is turned on . Doing so may corrupt the unit's data or the data on the SD card or
SDHC card .
* Carefully insert the USB flash drive, SD card, or SDHC card all the way in – until they are firmly in place .
* Place the AC adaptor so the side with the indicator (see illustration) faces upwards and the side with textual information faces downwards .
The indicator will light when you plug the AC adaptor into an AC outlet .

Top Screen

This screen is the basic screen that appears when you turn on the power .
Key and Song Name
Displays the key (p . 21) and name (p . 21)
of the currently selected song .
IN1
Displays the effect patch
number and patch name for
INPUT 1 (GUITAR/MIC) jack .
Play Mode
Displays the type of
playback (p . 9) .
Song playback location
Displays the current
location within the song .
The explanations in this manual include illustrations that depict what should typically be shown by the display .
Note, however, that your unit may incorporate a newer, enhanced version of the system (e .g ., includes newer sounds), so what you actually see in the
display may not always match what appears in the manual .
4
USB MEMORY port
Connect a USB flash
drive (sold separately) .
SD CARD slot
Indicator
Insert an SD card .
Input Sensitivity Icons
Displays icons based on the GAIN
settings (p . 23) .
AB REPEAT Segment
Indicates the segment to be
played back repeatedly (p . 12) .
Security slot (
)
http://www .kensington .com/
USB COMPUTER port
Connect the JS-10 to
a PC with a USB cable
(p . 13, p . 27) .
EXP PEDAL/CTL 1, 2 jack
Connect a footswitch (sold
separately) or expression pedal
(sold separately) (p . 30) .
IN2
Move the cursor here and the patch number and patch name of
the effect for the INPUT 2 (GUITAR/MIC) jack will be displayed .
Level Meter
Displays total level of the following sounds:
• The song being played now
• Input to INPUT 1 jack, INPUT 2 jack, and USB
COMPUTER port
S/P/C Icons
These icons are displayed when the song's
playback speed or pitch has been changed or
when Center Cancel is used .
S: Playback speed of the song has been changed
Song playback time
P: Pitch of the song has been changed
Displays time of the
C: Center Cancel is turned on
song .
PHONES jack
Connect headphones
(sold separately) .
LINE OUT jacks
Connect external
speakers .

Publicité

Table des Matières
loading

Table des Matières