Selecting Songs On The Usb Flash Drive; Deleting Songs; Playing A Guitar While Playing Back A Song - Boss eBand JS-10 Mode D'emploi

Play the Guitar with Songs as Your Backing

Selecting Songs on the USB Flash Drive

You can select songs on the USB flash drive .
1.
Follow this sequence of steps: [SONG LIST] button 
[MENU] button  "USB MEMORY"  [ENTER] button .
2.
Select the song you want to play .
3.
Press the [ENTER] button .
File formats supported by the JS-10
eBand format
Roland/BOSS proprietary compression format
MP3 format
MP3
Sampling rate
Bit rate
WAV format
WAV
Sampling rate
Quantization bit rate
Encoding

Deleting Songs

Here's how to delete the selected song .
NOTE
You cannot restore songs once they are deleted .
1.
Before starting, select the song you want to delete (p . 7) .
2.
Follow this sequence of steps: [MENU] button  "SONG"
 [ENTER] button  "ERASE"  [ENTER] button .
The message "Are you sure?" appears .
3.
To delete a song, press [ENTER] button .
The song will be deleted .
8
Format
44 .1 kHz
64 K – 320 Kbps
Format
44 .1 kHz
16 bits
Uncompressed (Linear)
Playing a Guitar While Playing Back a
Song
You can enjoy playing a guitar while playing back a favorite song as
your backing .
1.
Press the [ ] (PLAY) button .
The playback of the song will start .
2.
Gradually turn the [MASTER LEVEL] knob clockwise until
you reach the desired volume level .
3.
Turn the [INPUT LEVEL 1] knob and [INPUT LEVEL 2]
knob down to the minimum level (turn completely
counterclockwise) .
4.
While playing the guitar, gradually turn the [INPUT LEVEL
1] knob or [INPUT LEVEL 2] knob clockwise until you reach
the desired volume level .
5.
Press the [ ] (STOP) button to stop the song .
MEMO
• Pressing the [ ] (STOP) button while the song is stopped will
return the song playback location to the beginning (00:00) .
• Press the [ ] (Rewind) button or the [
button to move the song's playback location back or forward .
• Howling (feedback) could be produced depending on the
location of microphones relative to speakers . This can be
remedied by:
1 . Changing the orientation of the microphone(s) .
2 . Relocating microphone(s) at a greater distance from speakers .
3 . Lowering volume levels .
* When you connect a microphone, select an effect from the
categories for microphones (p . 10) . Also, switch the input
sensitivity of the INPUT jack to mic (p . 23) .
] (Fast Forward)