Operating Elements - Monacor TFT-800LED Mode D'emploi

LCD Monitor
These instructions are intended for users without
any specific technical knowledge . Please read the
instructions carefully prior to operation and keep
them for later reference .
All operating elements and connections de-
scribed can be found on page 2 .
Contents
1 Overview . . . . . . . . . . . . . . . . . 12
1.1 Operating elements . . . . . . . . . . . . . 12
1.2 Connections . . . . . . . . . . . . . . . . 13
2 Safety Notes . . . . . . . . . . . . . . . 13
3 Applications . . . . . . . . . . . . . . . 14
4 Installation . . . . . . . . . . . . . . . . 14
5 Connections . . . . . . . . . . . . . . . 14
5.1 Digital input . . . . . . . . . . . . . . . . 14
5.2 Analog inputs . . . . . . . . . . . . . . . 14
5.3 Power supply . . . . . . . . . . . . . . . . 14
6 Operation . . . . . . . . . . . . . . . . 14
6.1 Remote control . . . . . . . . . . . . . . . 15
6.1.1 Inserting / Replacing the battery . . . . . . . 15
6.2 Switching on/Standby . . . . . . . . . . . . 15
6.3 Indicating information on the video source . . . 15
6.4 Selecting the video source . . . . . . . . . . 15
6.5 Changing video and audio settings . . . . . . 15
6.6 Muting the sound . . . . . . . . . . . . . . 16
6.7 Selecting the picture format . . . . . . . . . 16
6.8 Sleep function . . . . . . . . . . . . . . . 16
6.9 Settings in the OSD menu . . . . . . . . . . 16
6.9.1 Menu page P ICTURE or P C . . . . . . . . 17
6.9.2 Menu page A UDIO . . . . . . . . . . . . 18
6.9.3 Menu page O SD . . . . . . . . . . . . . 18
6.9.4 Menu page F UNCTION or G EOMETRY . . . . 18
7 Specifications . . . . . . . . . . . . . . 19
12
1 Overview

1.1 Operating elements

1 Remote control
Function of the buttons
Power Standby
Muting / Unmuting
Selection of picture format:
Zoom
FULL 16 : 9
not possible for the source PC / VGA
Selection of video source
AV
AV1/AV2
PC / V GA
PC / HD
- to increase (
value for a parameter called up via the
button "Item"
- button

is briefly displayed in the top left corner
of the picture
Functions for the OSD menu:
- to select a menu page or a menu item
- to set the value for a menu item by
means of a scale
Video and audio settings:
Item
Use the button "Item" to select the
parameter:
VOLUME
CONTRAST
BRIGHTNESS
HUE*
(for NTSC only)
SATURATION*
SHARPNESS*
USER - R
(user-defined - red component)
USER - G
(user-defined - green component)
USER - B
(user-defined - blue component)
Then use the button
the value by means of the scale dis-
played .
* not available for video sources for which the
OSD menu shows the page PC
Note: It will only be possible to call up all picture param-
eters available for the corresponding video source when
the corresponding menu items (PICTURE MODE, COLOR TEMP
chapter 6 .9 .1) have been set to USER .
☞
4 : 3
HD
) or to reduce ( ) the
 
only: Information on source
or to adjust
 