Muting The Sound; Selecting The Picture Format; Sleep Function; Settings In The Osd Menu - Monacor TFT-800LED Mode D'emploi

seconds or at the end of the display time defined
in the OSD menu .
Settings for a video source will affect the other
sources connected as follows:
VOLUME
The setting applies to all sources .
CONTRAST
BRIGHTNESS
The settings only apply to the source
HUE
selected .
SATURATION
SHARPNESS
The settings are made separately: for
USER - R
the sources for which the menu shows
USER - G
the page PICTURE and for the sources for
USER - B
which the menu shows the page PC .

6.6 Muting the sound

To mute the sound, press the button
appear in the top left corner of the picture .
To unmute, press the button once again . The
sound will also be unmuted when the volume is
changed .

6.7 Selecting the picture format

To select the picture format (not possible for the
source PC / V GA), press the button "Zoom" repeat-
edly until the desired picture format is indicated:
FULL 16 : 9 4 : 3
The indication of the picture format will disap-
pear at the end of the display time defined in the
OSD menu . It will also disappear when you press
the button "Menu / OK" twice (= to activate and
deactivate the OSD menu) .

6.8 Sleep function

To activate or deactivate the sleep function (auto-
matic switchover to standby at the end of the time
defined), press the button "Sleep" repeatedly until
the desired time (in minutes) is indicated .
0 (= off) 15 30
The indication will disappear at the end of the
display time defined in the OSD menu . It will also
disappear when you press the button "Menu / OK"
twice (= to activate and deactivate the OSD menu) .
When you press the button "Sleep" while the
sleep function is activated, the monitor will show
the remaining time until it goes to standby . After
automatic switchover to standby, the function will
be reset to 0 .
16
45 60

6.9 Settings in the OSD menu

For the OSD menu, the four buttons "Menu / OK",
"Source / ",
1) Press the button "Menu / OK" to call up the
menu . You will enter the highest menu level
(page selection bar) . The menu has several pages
which are marked with a corresponding icon .
2) Use the button
3) To go to the page selected, press the button
"Source / " . The first menu item of the page is
highlighted in green and thus selected .
4) Use the button
menu item .
5) To make a setting, proceed as follows:
– If a value can be set for the menu item by
means of a scale (e . g . the value for a picture
: MUTE will
parameter), press the button "Source / ": The
menu page will disappear and only the setting
scale will be indicated . Press the button
increase the value or
To return to the menu page, press the button
"Menu / OK" .
– If multiple setting options are available for
the menu item (e . g . "ON" or "OFF" or various
menu languages), use the button "Source / "
to select the option .
– If only ">" is indicated after a menu item, the
button "Source / " can be used to call up a
submenu page, to activate a function or to
show some information .
6) To exit the menu page, press the button "Menu /
OK" . To completely exit the menu, press the
button "Menu / OK" once again . If you do not
press any button, the menu will automatically
disappear at the end of the display time defined
in the OSD menu (DURATION
and are required .
 
or to select the page .
 
or to select the desired
 
to reduce the value .

☞
to

chapter 6 .9 .3) .