Specifications - Monacor TFT-800LED Mode D'emploi

DLC (Dynamic Luminance Control)
Use the button "Source / " to activate (ON =
picture reproduction in deeper black) or deacti-
vate (OFF) the function .
SCREEN SAVER
To prevent shadow images (= persistence of
previous picture contents) when still pictures
are shown for a longer time, a function can be
activated to slightly move the picture at regular
intervals . Use the button "Source / " to activate
(ON) or deactivate (OFF) the function .
Version GEOMETRY for the source PC / V GA
H-POSITION (horizontal shift of picture)
Press the button "Source / " to call up the set-
ting scale and use the button
picture to the right or the button
picture to the left . To return to the menu page,
press the button "Menu / OK" .
V-POSITION (vertical shift of picture)
Press the button "Source / " to call up the set-
ting scale and use the button
picture upwards or the button
picture downwards . To return to the menu page,
press the button "Menu / OK" .
CLOCK
For fine adjustment of the picture width in case
of vertical lines in the picture . Press the button
"Source / " to call up the setting scale and use
the button to increase the width or the button

to reduce the width . To return to the menu

page, press the button "Menu / OK" .
PHASE
To optimise sharpness and stability . Press the
button "Source / " to call up the setting scale
and use the button
will ensure optimum sharpness (e . g . of char-
acters) and prevent horizontal interference .
To return to the menu page, press the button
"Menu / OK" .
AUTO ADJUST
Press the button "Source / " to activate the
automatic picture adjustment . You will exit the
menu and AUTO ADJUST will be indicated while
the automatic adjustment is being made . Values
set manually for H-POSITION, V-POSITION, CLOCK
and PHASE will be readjusted .
SCREEN SAVER
same menu item as in version FUNCTION: see
above
to shift the

to shift the

to shift the

to shift the

or to set a value which
 
7

Specifications

Colour system: . . . . . PAL / NTSC (automatic switching)
Diagonal screen size: . 20.3 cm (8")
Aspect ratio: . . . . . . . 17 : 10
Maximum resolution: . 1024 × 600 pixels
Pixel pitch (mm): . . . . 0.1725 × 0.1656
Viewing angle: . . . . . hor. 150°, vert. 145°
Response time: . . . . . 10 / 20 ms (Tr/ Tf)
Brightness: . . . . . . . . 500 cd / m
Contrast ratio: . . . . . . 700 : 1
Colour support: . . . . . 16.2 million colours
Inputs
FULL HD: . . . . . . . . HDMI™ connector, type A
VGA: . . . . . . . . . . . Sub-D connector
resolutions supported:
800 × 600 at 60 Hz
800 × 600 at 72 Hz
800 × 600 at 75 Hz
1024 × 600 at 60 Hz
1280 × 800 at 60 Hz
VIDEO: . . . . . . . . . . BNC connector, 1 Vpp / 75 Ω
AUDIO: . . . . . . . . . . 3.5 mm jack, 0.7 V/ 30 Ω,
the audio input is assigned to the
inputs VIDEO and VGA
Speaker: . . . . . . . . . . 2 W
Power supply: . . . . . . via power supply unit provided
and connected to 230 V/ 50 Hz
Ambient temperature: 0 – 40 °C
Dimensions*: . . . . . . 210 × 151 × 36 mm (W × H × D)
Weight*: . . . . . . . . . . 0.52 kg
*without support
Subject to technical modification .
All rights reserved by MONACOR
GmbH & Co. KG. No part of this instruction manual
may be reproduced in any form or by any means for
any commercial use.
2
INTERNATIONAL
®
19