Assembly And Commissioning - Matrix Stanley 4 in 1 Garden tool Traduction Des Instructions Originales

5. Assembly and commissioning

Note:
Before affixing cutting equipment, first remove the transport protection. When replacing thread spool or
the blade, the cutting guard (15) should not be removed.
To reduce the risk of unintentional start-up, pull out the spark plug connector.
5.1 Brush cutter-grass trimmer-pruner--hedge shear- combination device: Handle
Module 1
1
18
A6
5.2 Brush cutter-grass trimmer-pruner--hedge shear- combination device: Grass trimmer
Risk of injury
ATTENTION: For all work performed on and for cutting tools, always wear protective gloves.
Module 2
15
19
Mounting
Secure the handle (1)
with the 4 mounting
bolts and the nuts of
the protective device
(18) to the drive unit.
28
Mounting
To use the device as grass trimmer, the cutting
guard (15) and thread spool (19) are fitted.
G
B
28
1
15
19
15