Matrix Stanley 4 in 1 Garden tool Traduction Des Instructions Originales page 21

5.5 Brush cutter-grass trimmer-pruner-hedge cutter combination device: Pruner
RISK OF INJURY
ATTENTION: For all work performed on and for cutting tools, always wear gloves.
Module 5
23 21
22
10
26a
26
Teil C
Teil B
a
A11
Mounting
Remove the transport cover.
Connection of the drive unit
a
and module:
Insert the ends of the modules
to be connected together into
one another.
Make sure that the locking pin
(26) is snapped in place. Check
what has been pulled apart
on a trial basis. Fold down the
cover (26a) and and secure the
modules by tightening the set
screw (10).
Release of the drive unit and
module:
Release the locking screw (10).
10
The cover (26a) jumps back.
26
Hold the locking pin (26) found
under the cover pressed and
simultaneously release the
26a
modules from one another by
carefully pulling them apart.
G
B
21