Technical Data - Matrix Stanley 4 in 1 Garden tool Traduction Des Instructions Originales

Ensure that the saw chain does not come in contact with
foreign objects such as stones, fences, nails, etc... These
objects could be flung away and injure the the user or
passers-by or damage the saw chain.
National regulations can restrict the use of the device.
Do not use the machine in any position from which it can
come within a radius of 10 m to high-voltage power.
For an adequate protective equipment during the use,
care has to be taken as per the operating instructions.
All other usages are ruled out. The user / operator is
responsible for injuries resulting damage or injury due
to incorrect use and not the manufacturer. Only 3-teeth
blades suitable for the machine as mentioned in the
operating manual may be used.
Pull out the spark plug connector before any work
is carried out on the device itself (e.g. transport,
construction, conversion, cleaning and maintenance
work) !!!!
3.1 Usage according to the intended purpose
Brush Cutter, Grass trimmer
The Petrol-brush cutter is dependent on the mounted
cutting tool intended for trimming lawn or grass, for
cutting scrub, shrubs, bushes and young trees in the
private area.
The device must not be used for other purposes.
The manufacturer does not assume any liability in case
of improper use as well as changes to the machine.
Please also take note of the safety instructions, the
installation and operating instructions as well as
the other generally applicable accident prevention
regulations.
High Button
The Petrol-pruner is built as per the state of the art and
the recognized technical safety regulations. However,
in the event of improper use or usage not according the
intended purpose there may be a hazard to life and limb
of the user or third parties or damage to the device itself
and/or other material assets.
The Petrol-pruner is a portable, hand-held device, which
is fitted with a cutting equipment, which is fixed to a
shaft. This pruner is designed only for cutting trees and/
or other wood from the ground. The cutting equipment
used is a saw chain with guide rail.
This appliance is only designed for private use or for
use in the home and must not be used in continuous
operation for commercial purposes. Any other use is the
responsibility of the the user.
The observance of the operating and installation manual
as well as the adherence of the maintenance conditions
are part of the usage as per intended use.

4. Technical data

Motor:
Motor type:
Power (max):
Displacement:
Max. engine speed:
Volume (fuel tank):
Start system:
Speed range in idle speed:
Speed at coupling:
Carburettor:
Spark plug:
Mixing ratio:
Pruner
Length of cut:
Chain spacing:
Chain thickness:
Chain type:
Sound pressure level L :
pA
Sound power level L :
WA
Uncertainty K:
G
B
2-stroke engine, air-cooled;
chrome cylinder engine
0.75 kW
3
26 cm
-1
12500 min
3
400 cm (0.4 l)
Rewind starter
-1
3000 min
-1
4430 min
Ruixing H142A-30H-00-00
Huayi MC1359BE
TORCH L8RTC
CHAMPION RCJ6Y
40:1
10"
3/8"
0.050"
91PJ040X, pitch:3/8''
80.4 dB(A)
100.4 dB(A)
3 dB(A)
13