Matrix Stanley 4 in 1 Garden tool Traduction Des Instructions Originales page 14

G
B
Uncertainty K:
Guaranteed sound power level LWA:
Vibration
Uncertainty K:
Brush cutter and grass trimmer
Cutting diameter:
Cutter blade:
Cutting threads/thread spool:
The rotation speed of the cutting
accessories at maximum motor
speed:
Sound pressurel(Brush cutter) L
Sound pressurel(Brush cutter) L
Uncertainty K:
Sound pressurel(Grass trimmer) L
Sound pressurel(Grass trimmer) L
Uncertainty K:
Vibration level (Brush cutter) a
Uncertainty K:
Vibration level (Grass trimmer)
Uncertainty K:
Pole hedge trimmer:
Sound pressurel(Hedge trimmer)L
Sound pressurel(Hedge trimmer)
L :
wAav
Uncertainty K:
Vibration level (Hedge trimmer) a
Uncertainty K:
Blade for hedge shears:
Angle range
The angle of the hedge shears can be at 80° set up to
-90° with regard to the shaft tube.
Note: The vibration value stated is ascertained as per
the standardized test procedures and can be used to
compare different devices with one another.
Wear hearing protection to prevent hearing impairment.
In addition, this value is suitable to be able to estimate
loads for the user, which happen through vibrations, in
advance.
Warning! Depending on how you use the device, the
actual vibration values can deviate from the specified
values.
14
3 dB(A)
114 dB(A)
2
10.220m/s
2
1.5 m/s
230 mm (brush
cutter );
430 mm (grass
trimmer)
0230x1.6-4T
6m x ø2 mm
-1
8500 min (brush
cutter);
-1
8500 min (grass
trimmer)
: 94.8 dB(A)
pAav
: 110.8 dB(A)
wAav
3 dB(A)
: 93.5 dB(A)
pAav
: 107.8 dB(A)
wAav
3 dB(A)
2
: 10.220 m/s
hv,eq
2
1.5 m/s
2
: 8.712 m/s
ahv,eq
2
1.5 m/s
: 80.4 dB(A)
pAav
100.4 dB(A)
3 dB(A)
2
10.220 m/s
hv,eq:
2
1.5 m/s
Blade spacing:
24mm;
Max. cutting length
365 mm.
Take measures to protect against the stress of vibration.
Take into account of the whole workflow, also points
in time at which the tool functions without load or is
switched off.
Among other things, appropriate measures include a
regular maintenance and care of the device and the
insertion tools, keeping the hands warm, regular breaks
and a good planning of the work processes.