Invacare MyOn Active Manuel De L'utilisateur page 91

Removing
1. Pull the front rigging release lever (A).
2. If desired, rotate front rigging assembly (B) outward or inward.
3. Lift the front rigging assembly off of the mounting tube (C).
C
MyOn JR
 For this procedure, refer to FIGURE 13 on page 92.
For maintenance and/or adjustment procedures, refer to Troubleshooting and Maintenance on page 37.
Installing
1. Position the front rigging assembly (A) to the inside of the wheelchair frame.
2. Insert footrest mounting pin (B) into mounting tube (C).
3. Rotate the front rigging assembly towards the outside of the wheelchair until it locks into place.
Part No 1167417
FIGURE 12 Installing/Removing Front Riggings - MyOn and MyOn Active
A
91
7 WHEELCHAIR OPERATION
B
Invacare® MyOn
™