1 FRONT RIGGINGS
1 Front Riggings
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
1.1
Adjusting Footrest Height
For this procedure, refer to FIGURE 1 on page 43.
MyOn and MyOn Active
1.
Loosen the mounting screw (A).
2.
Adjust the footrest (B) to the desired height.
3.
Securely tighten mounting screw after adjustment.
4.
If necessary, repeat STEPS 1-3 to adjust remaining footrest.
™
Invacare® MyOn
42
Part No 1167417