Mounting The Cockpit Bracket And The Wing Screw Joint; Mounting The Landing Gear Shaft And The Wing Mounting - Reely SKY EXTRA 300 Notice D'emploi

b) Mounting the Cockpit Bracket and the Wing Screw Joint
Glue the cockpit bracket with the two quadratic openings (1) with 5 minute
epoxy glue at the front in the middle of the slot in the fuselage
After you have attached the nuts to the wing screw joint (2) with super glue,
the screw joint is also to be glued to the fuselage with 5 minute epoxy glue.
c) Mounting the Landing Gear Shaft and the Wing Mounting
The wing mounting (1) is to be mounted in accordance with the illustration
and in the same manner as the cockpit bracket.
The landing gear cable shaft (2) is glued to the bottom of the model.
Figure 4
Figure 5
37