Assembly; Assembling The Frame - Cleanmaxx NK-165 Mode D'emploi

Assembly

CAUTION!
■ Before you attach or detach any accessories, ensure that the device is not connected
to the mains power.

Assembling the Frame

Inserting / Removing the Cordless Vacuum Cleaner
The cordless vacuum cleaner can only be inserted into the frame without a
nozzle.
23
1. Insert the nut supplied (3) into the matching opening in the
frame (24).
2. Plug the shaft (18) onto the frame (24) as far as it will go.
3. Turn over the frame (24).
4. Insert the screw supplied (2) as far as it will go into the
drilled hole in the shaft (18) (The screw head must not pro-
trude.) and tighten it using a screwdriver or a coin.
5. Plug the turbo nozzle (25) into the opening at the bottom
end of the frame (24). It must engage properly.
• To remove it, press the release button (30) for the turbo
nozzle (25) and pull it out at the same time.
• Inserting: Hold the cordless vacuum cleaner with the col-
lecting container (5) at the bottom and fi rst insert it into
the frame (24) at the bottom. Then press the handle (12)
towards the frame (24) until the cordless vacuum cleaner
is heard to engage in place.
EN