Before Fi Rst Use; Unpacking The Product Contents; Assembly - Cleanmaxx XL-777C-80 Mode D'emploi

Before fi rst use
Before fi rst use
Before you can use the device, you must:
• unpack the product contents,
• assemble the device.

Unpacking the product contents

ATTENTION!
❐ Keep children away from the packaging. Danger of suffocation exists!
• Remove all parts from the packaging and carefully lay them out on an even fl oor. To
be on the safe side, lay out a protective foil in order to prevent any damage to sensi-
tive surfaces. Carefully remove all packaging materials. Make sure that the product
contents are complete (see "Product contents and device overview") and check for
any damages from transport. If you identify damages to the components, do not use
them (!), instead contact our customer service centre.
• Please keep in mind that there may be residual dirt in the dust bin or fi lters. This dirt
residue is present because of quality controls and does not constitute reasons for a
warranty claim.

Assembly

ATTENTION!
❐ The device must always be switched off when you want to assemble or disassemble
the device or replace the accessory nozzles.
1. Insert the thicker end of the suction tube in the port on
the front of the device as shown. The suction tube must
audibly lock into place.
2. Push the two opposing latches on the connection piece
together to remove the suction tube and pull the suction
tube out at the same time.
3. Insert the curved end of the suction tube into the larger
opening of the telescoping tube. For better seating, gently
turn the tube back and forth in the process.
22