Assembly; Inserting The Telescopic Tube - Cleanmaxx CP-CY4207ES-2 Mode D'emploi

EN

Assembly

CAUTION!
■ Keep children away from the packaging material. There is a danger of suffocation!
Take all parts out of the packaging and place them carefully on a level surface. If necessary,
place protective fi lm underneath the parts to prevent any damage to delicate surfaces.
Carefully remove all packaging materials. Check the items supplied for completeness
(see the"Items Supplied and Device Overview" chapter) and possible transport damage.
If you fi nd any damage to the components, do not use them (!), but contact our customer
service department.
Inserting / Removing the Suction Hose
1. Insert the thicker end of the suction hose as illustrated into the
2. To remove the suction hose, press the two opposite buttons

Inserting the Telescopic Tube

1. Insert the curved end of the suction hose into the larger opening
2. Insert the other end of the telescopic tube into the desired
Adjusting the Length of the Telescopic Tube
1.
A
2. Release the slide and move the tube slightly up or down until
09671_de-en-fr-nl_V1.indb 20 09671_de-en-fr-nl_V1.indb 20
20
connection on the front of the device. The suction hose must be
heard to engage in place.
on the connection piece and as you do this pull out the suction
hose.
of the telescopic tube. To ease insertion, twist the tube slightly
back and forth.
nozzle.
Press the slide (A) on the telescopic tube downwards and
adjust the tube to the desired length.
it engages.
11.08.2015 12:30:54 11.08.2015 12:30:54