Assembly; Inserting / Removing The Hose; Attaching The Bracket To The Telescopic Tube - Cleanmaxx XL-306E-220 Mode D'emploi

Hard floor nozzle

Assembly

AttEntIOn!
❐ Danger of suffocation! Keep the packaging material away from children and animals.
Take all parts out of the packaging and place them carefully on a level surface. If necessary,
place protective film underneath the parts to prevent any damage to delicate surfaces. Carefully
remove all packaging materials. Compare the contents with the parts list.
Inspect the device for transport damage. If you note any damage, do not use the device (!); please
contact the customer service department.

Inserting / removing the hose

Attaching the bracket to the telescopic tube

08186_DE-GB-FR-NL_V1.indb 21
All manuals and user guides at all-guides.com
Turbo nozzle
1. Insert the thicker end of the suction hose as illustrated into the
connection on the front of the device.
2. To remove the suction hose, press the two opposite buttons on the
connection and pull out the hose.
1. Push the bracket onto the telescopic tube (with the hook facing
towards the other end of the tube) and push it into the lower part
of the tube.
2. Secure the bracket by tightening the screw using an cross-head
screwdriver.
21
07.12.12 09:09